STAND ‘N SEAM® PRODUCT OVERVIEW
This high performance, mechanically seamed roof system satisfies the most demanding applications. The panels can be roll-formed and curved to span an entire roof without end seams.
PANEL SPECS
- Highest wind-uplift resistance of any standing seam panel on the market
- Unrestricted thermal movement
- Double lock-seamed side joints
- Factory or field-forming
- Factory applied sealant
- Substrate Offering: .032″ and .040″ Aluminum and 24 Gauge and 22 Gauge Steel and Copper
- Maximum Factory Forming Panel Length: 47′
- Minimum Panel Length: 6′
TECHNICAL DATA
- Min Roof Slope: 1/2:12
- Hail Resistance: UL2218, Class 4
- Fire Resistance: UL790, Class A
RESOURCES:
- Stand N Seam Brief Product Specification
- Stand N Seam CSI 3-Part Spec
- Stand N Seam Technical Specification
- Seamer Rental – Rent a seamer for project installation
- Additional resources and technical documents
| Test Data | ||
|---|---|---|
| Wind Uplift | UL90 | #275, 275A, 275B |
| ASTM E330 | 24 ga. allowable load of 95.76 psf @ 2.5′ | |
| 22 ga. allowable load of 87.88 psf @ 5′ | ||
| .032″ AL allowable load of 48.48 psf @ 5′ | ||
| .032″ AL allowable load of 66.67 psf @ 2.5′ | ||
| .040″ AL allowable load of 66.67 psf @ 5′ | ||
| .040″ AL allowable load of 82.42 psf @ 2.5′ | ||
| Air infiltration | ASTM E283 | .006 @ 20 psf |
| ASTM E1680 | 0.00 @ 20 psf | |
| Water penetration | ASTM E331 | no water @ 20 psf |
| ASTM E1646 | no water @ 20 psf |
