In August 2014, the doors will open to a new school that incorporates the technology of today and the infrastructure of tomorrow. Clad in Fabral’s Silhouette HCF, a horizontal concealed fastener metal wall panel, the Career & Technology High School was designed to enhance student learning, while engaging the i-Generation. With a commitment to energy efficiency, the 250,000 sq.ft. facility integrates the uses of day lighting and renewable energy.
Career & Technical High School
Project Details
- 250,000 sq. ft. facility
- 374 sq of 20 ga Custom Light Bronze HCF 12-1C
- 33 sq of 20 ga Bright Copper Select Series 12-R2
- 15 sq of .040″ Perforated Bright Silver 7/8″ Corrugated
- Architect – Bay-IBI Group Architects
- Civil Engineer – Brooks & Sparks Inc
- General Contractor – Dyad Construction LP
- Mechanical & Electrical Engineer – Kalmans Marshall Engineering Inc
- Owner – Pasadena ISD Facilities and Construction Department
- Structural Engineer – CJG Engineers
- Materials Installer – MH Brothers LLC
Link to school: http://careerandtechnical.pasadenaisd.org/
Color Details
Fabral custom color Light Bronze and Mica colors Bright Copper and Bright Silver were chosen for this project. These colors support the sustainable initiative.
Product Details
Box Rib HCF Series
The Fabral Box Rib HCF (horizontal concealed fastener) System is available in a range of profiles and configurations for architectural, commercial and industrial applications. With one to four ribs, this strong, durable wall panel system provides design versatility and performance. An interlocking sidelap hides fasteners and can be installed with or without clips to accommodate thermal movement
Box Rib HCF 2aC, 2C, 2wC, 3C
Box Rib HCF Series concealed fastener wall panels seamlessly integrate with adjacent materials, windows and design elements.
Box Rib HCF Series
Panel Options Available: Multiple Panel Profiles Designs with both 12″ and 16″ options
Check with local sales representative for availability of 20GA and 18GA steel options and .040 - .050 aluminum options.
Subject to change without notice. Substrate Offering: .032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel Panel Features: Factory Applied Sealant Product Installation: Install panels plumb, level and straight so they are weathertight and without waves or other distortions that may limit thermal movement. Apply sealant tape or caulking as necessary at flashing and panel joints to prevent water penetration. Product Maintenance & Warranty: Use proper care to ensure the durability of Box Rib HCF panels. Remove filings, grease, stains, marks or excess sealants from roof panel system to prevent staining. Store panels and flashings in a safe dry environment. Box Rib HCF has a 30-year finish warranty against cracking, chipping, peeling, fading and chalking.
Panel Width: 12", 16"Hail Resistance: UL 2218 Class 4 Hail Impact ResistanceFire Resistance: UL 790 Class A Fire ResistanceMaximum Panel Length: 30′Minimum Panel Length: 2′Wind Uplift Table
PANEL/SUBSTRATE
SPANS
2'-0"
2"-6"
3'-0"
3'-6"
4'-0"
24 GA Steel
3
54
48
43
38
33
22 GA Steel
3
60
53
48
42
37
.032 Aluminum
3
48
42
36
30
24
7/8″ Corrugated
Fabral Corrugated panels are classically designed exposed fastener panels with multiple coverage and spacing options to choose from. With exceptional durability and unlimited color options, any one of Fabral’s corrugated panels would be the perfect choice for function and creativity. The construction of corrugated panels allows them to follow every curve of your design where needed when installed vertically. And it’s suitable for use on both wall and roof applications. With corrugated panels your vision is limitless
7/8″ Corrugated
Substrate Offering: .032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel Panel Features: Vertical & Horizontal Applications Customizations Available: Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′Minimum Panel Length: 6′
Select Series® 12
With a concealed fastener, this plush panel design is suited for long spanning walls, equipment screens, fascia and soffit applications. Panels have also been utilized as a rainscreen system
Select Series® 12
Panel Options Available: 12-R2 (Recommended), 12-R0, 12-W
Maximum Panel Length: 45′Minimum Panel Length: 4′
Box Rib HCF Series
The Fabral Box Rib HCF (horizontal concealed fastener) System is available in a range of profiles and configurations for architectural, commercial and industrial applications. With one to four ribs, this strong, durable wall panel system provides design versatility and performance. An interlocking sidelap hides fasteners and can be installed with or without clips to accommodate thermal movement
Box Rib HCF 2aC, 2C, 2wC, 3C
Box Rib HCF Series concealed fastener wall panels seamlessly integrate with adjacent materials, windows and design elements.
Box Rib HCF Series
Panel Options Available: Multiple Panel Profiles Designs with both 12″ and 16″ options
Check with local sales representative for availability of 20GA and 18GA steel options and .040 - .050 aluminum options.
Subject to change without notice.
Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant
Product Installation: Install panels plumb, level and straight so they are weathertight and without waves or other distortions that may limit thermal movement. Apply sealant tape or caulking as necessary at flashing and panel joints to prevent water penetration.
Product Maintenance & Warranty: Use proper care to ensure the durability of Box Rib HCF panels. Remove filings, grease, stains, marks or excess sealants from roof panel system to prevent staining. Store panels and flashings in a safe dry environment. Box Rib HCF has a 30-year finish warranty against cracking, chipping, peeling, fading and chalking.
Panel Width: 12", 16"
Hail Resistance: UL 2218 Class 4 Hail Impact Resistance
Fire Resistance: UL 790 Class A Fire Resistance
Maximum Panel Length: 30′
Minimum Panel Length: 2′
Wind Uplift Table
| PANEL/SUBSTRATE | SPANS | 2'-0" | 2"-6" | 3'-0" | 3'-6" | 4'-0" |
| 24 GA Steel | 3 | 54 | 48 | 43 | 38 | 33 |
| 22 GA Steel | 3 | 60 | 53 | 48 | 42 | 37 |
| .032 Aluminum | 3 | 48 | 42 | 36 | 30 | 24 |
7/8″ Corrugated
Fabral Corrugated panels are classically designed exposed fastener panels with multiple coverage and spacing options to choose from. With exceptional durability and unlimited color options, any one of Fabral’s corrugated panels would be the perfect choice for function and creativity. The construction of corrugated panels allows them to follow every curve of your design where needed when installed vertically. And it’s suitable for use on both wall and roof applications. With corrugated panels your vision is limitless
7/8″ Corrugated
Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel
Panel Features:
Vertical & Horizontal Applications
Customizations Available:
Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′
Minimum Panel Length: 6′
Select Series® 12
With a concealed fastener, this plush panel design is suited for long spanning walls, equipment screens, fascia and soffit applications. Panels have also been utilized as a rainscreen system
Select Series® 12
Panel Options Available: 12-R2 (Recommended), 12-R0, 12-W
Maximum Panel Length: 45′
Minimum Panel Length: 4′