Architectural/Commercial Products

Fabral is the premier supplier of metal roofing and wall panels for architectural, educational, commercial, industrial and agricultural applications.

Filter by Product Type:
Fabral High Seam

High Seam

An easy to install, snap-on. Seam design allows for easy removal of individual panels when necessary.

Solid Substrate Installation Only
Shadow Lines Available
Fabral Twin Fold

Twin-Fold

Fabral Twin-Fold is a mechanically seamed low profile standing seam panel. This high-performance panel is ideal for roofing applications requiring tapering to ensure a perfect fit.

Requires solid decking
Panel Width: 12”, 16”, 18”
Minimum Roof Slope: 3:12
Maximum Panel Length: 47’
Minimum Panel Length: 6’

Hefti-Rib 288 (HR-288)

A classically designed exposed fastener panel with 7.2″ rib spacing. The unique construction of Hefti-Rib® allows panels to follow every curve of your design. And it’s suitable for use on both wall and roof applications (in siding only, can be applied in vertical and horizontal orientation).

Panel Options Available: Panel Variations Hefti-Rib and Reverse Run Hefti-Rib I are Available
Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel
Panel Features:
Vertical & Horizontal Applications
Customizations Available:
Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′
Minimum Panel Length: 6′

Select Series® 12

With a concealed fastener, this plush panel design is suited for long spanning walls, equipment screens, fascia and soffit applications. Panels have also been utilized as a rainscreen system

Panel Options Available: 12-R2 (Recommended), 12-R0, 12-W
Substrate Offering:
.032″ Aluminum .040″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel
Customizations Available:
Perforation
Maximum Panel Length: 45′
Minimum Panel Length: 4′

Select Series® 612

For long spanning walls, this panel does not require clips. It is “six up six down” and for vertical use. Functionality is key with this standard panel

Panel Options Available: 612-R1 (Recommended), 612
Substrate Offering:
.032″ Aluminum .040″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel
Customizations Available:
Perforation
For Vertical Use Only
Maximum Panel Length: 45′
Minimum Panel Length: 4′

Décor-Flush II

Décor Flush II panels are recommended for siding, fascias, or soffits only. When used for wall applications, Décor Flush II should only be installed vertically. Install panels plumb, level and straight so it is watertight and without waves or other distortions, allowing for thermal movement considerations. Apply sealant tape or caulking as necessary at flashing and panel joints to prevent water penetration.

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
Customizations Available:
Perforation
For Soffit, Fascia and Vertical Wall Applications Only
Maximum Panel Length: 25′
Minimum Panel Length: 6′

Décor-Flush ®

This attractive concealed fastener system is ideal for soffit, fascia and vertical wall applications

Substrate Offering:
.032″ Aluminum 24 Gauge Steel
Customizations Available:
Perforation
For Soffit, Fascia and Vertical Wall Applications Only
Maximum Panel Length: 25′
Minimum Panel Length: 6′

Posi-Lock Soffit

This panel system is ideal for soffit applications

Substrate Offering:
.032″ Aluminum 24 Gauge Steel
Panel Features:
Fully Vented
Customizations Available:
Perforation
Interlocking design with concealed fasteners allows for fast and economical installation | Aluminum is available vented with a 9.2% free open area
Panel Width: 14″
Maximum Panel Length: 25′
Minimum Panel Length: 6′

Stand ’N Seam®

This high performance, mechanically seamed roof system satisfies the most demanding applications. The panels can be roll-formed and curved to span an entire roof without end seams.

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel Copper
Panel Features:
Double lock-seamed side joints Factory Applied Sealant Unrestricted thermal movement
Customizations Available:
Factory-Forming Field-Forming
Highest wind-uplift resistance of any standing seam panel on the market
Minimum Roof Slope: 1/2:12
Hail Resistance: UL2218, Class 4
Fire Resistance: UL790, Class A
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Test Data

Wind Uplift UL90#275, 275A, 275B
ASTM E330 24 ga. allowable load of 95.76 psf @ 2.5′
22 ga. allowable load of 87.88 psf @ 5′
.032″ AL allowable load of 48.48 psf @ 5′
.032″ AL allowable load of 66.67 psf @ 2.5′
.040″ AL allowable load of 66.67 psf @ 5′
.040″ AL allowable load of 82.42 psf @ 2.5′
Air infiltrationASTM E283.006 @ 20 psf
ASTM E16800.00 @ 20 psf
ASTM E331no water @ 20 psf
ASTM E1646no water @ 20 psf

PowerSeam ™

When curving is required for a design, this mechanically seamed structural standing seam roof panel can bend to create the desired look

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant Factory-forming Field-forming
Customizations Available:
180 Degree Seaming 90 Degree Seaming Curving Options Tapering Options
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Test Data

Wind uplift UL90#90, 176, 180, 238, 548, 549
Air infiltrationASTM E283ASTM E1680.01 @ 15 psfLess than .01 @ 1.57psf
Water penetrationASTM E331ASTM E1646ASTM E2140No water @ 6.24 psfNo water @ 16 psfNo water at 6 hours

PowerSeam Wind Uplift Loads (PSF)

SubstrateWidth3.0’3.5’4.0’4.5’5.0’
24 g steel12”5353535353
24 g steel18”3535353535
22 g steel12”7070707070
22 g steel18”4747474747

PowerSeam ™ II

With superior strength and spanning capability, Fabral Powerseam II is a high-performance, mechanically seamed standing seam roofing system. With 180 degree machine seaming, field rollforming and the ability to curve to a minimum 10’ radius, Powerseam II delivers performance and value to education, athletic and industrial projects. Shadow lines and stiffening ribs available

Substrate Offering:
.040″ Aluminum 22 Gauge Steel 24 Gauge Steel

Test data

Air InfiltrationASTM E2830.01 cfm/ft2 @ 15 psf
ASTM E1680<0.01 cfm/ft2 @ 1.57 psf
Water PenetrationASTM E331No water leakage @ 6.24 psf
ASTM E1646No water leakage @ 2.86 psf
ASTM E2140No leakage of standing water
Wind UpliftASTM E1592Test results vary depending on gauge and panel thickness
UL580Class 90

PowerSeam Wind Uplift Loads (PSF) Double Lock

SubstrateWidthSpans2′-0″2′-6″3′-0″ 3′-6″4′-0″4′-6″5′-0″
24 ga. Steel16” 3+102928273635344

Thin Seam

A snap-together panel for easy installation with no mechanical seaming tool required. Ideal for installation over solid substrate and open framing.

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel Copper
Panel Features:
Factory Applied Sealant Unlimited Thermal Movement
Customizations Available:
Batten Seam Lines Tapering Options
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Test Data

Wind UpliftUL580Class 90 #303, 359, 359A, 343, 417
ASTM E1592Results Vary Depending on Gauge and Panel Thicknessa
Air infiltrationASTM E283.009 @ 6.24 psf
Water penetrationASTM E331no water @ 15 psf

Architectural/Commercial Markets

From energy-saving cladding for schools to vibrant enclosure systems for large retail chains, Fabral is a reliable solution for whatever market you’re in.

Education

Government

Healthcare

Industrial

Retail

Modern-day models for education facilities have been designed with Fabral products. As the leading provider of metal for building envelope solutions, Fabral systems have been specified for projects in every commercial building segment. Durable exterior cladding is fitting for schools to tightly seal the building — netting next-level energy efficiency.

VISION House at Mariposa Meadows

Telluride, Colorado

One of the home’s most prominent features is its metal roofing system. The material, donated by Fabral, is our classic 24-gauge 1 ½" SSR metal roofing panels in Charcoal. This roof makes it easy to achieve structural stability and is designed to perform at optimum levels year after year.

Continue Reading

Submittal Builder

Use this Spec Builder to create custom packages or download a complete Submittal Package for the Fabral Stand N Seam, PowerSeam, Thin Seam, Hefti-Rib, or HCF panels.

Pre-Packaged Download

Click below for pre-packackged zipped downloads.

Create Your Own Package

To download files for additional Fabral panels and build your own specification package, name your file and then begin selecting.