Architectural/Commercial Products

Fabral is the premier supplier of metal roofing and wall panels for architectural, educational, commercial, industrial and agricultural applications.

Filter by Product Type:

PowerSeam™ II

With superior strength and spanning capability, Fabral Powerseam II is a high-performance, mechanically seamed standing seam roofing system. With 180 degree machine seaming, field rollforming and the ability to curve to a minimum 10’ radius, Powerseam II delivers performance and value to education, athletic and industrial projects. Shadow lines and stiffening ribs available

Test data

Air InfiltrationASTM E2830.01 cfm/ft2 @ 15 psf
ASTM E1680<0.01 cfm/ft2 @ 1.57 psf
Water PenetrationASTM E331No water leakage @ 6.24 psf
ASTM E1646No water leakage @ 2.86 psf
ASTM E2140No leakage of standing water
Wind UpliftASTM E1592Test results vary depending on gauge and panel thickness
UL580Class 90

PowerSeam Wind Uplift Loads (PSF) Double Lock

SubstrateWidthSpans2′-0″2′-6″3′-0″ 3′-6″4′-0″4′-6″5′-0″
24 ga. Steel16” 3+102928273635344

Thin Seam

A snap-together panel for easy installation with no mechanical seaming tool required. Ideal for installation over solid substrate and open framing.

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel Copper
Panel Features:
Factory Applied Sealant Unlimited Thermal Movement
Customizations Available:
Batten Seam Lines Tapering Options
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Test Data

Wind UpliftUL580Class 90 #303, 359, 359A, 343, 417
ASTM E1592Results Vary Depending on Gauge and Panel Thicknessa
Air infiltrationASTM E283.009 @ 6.24 psf
Water penetrationASTM E331no water @ 15 psf

Slim Seam®

Economical high performance standing seam peak system. Panel is ideal for installing over solid substrate and open framing.

SLIM SEAM IMPROVEMENTS 2018: Slim Seam Florida Approval

Maximum Panel Length: 47′
Minimum Panel Length: 6′
Wind uplift UL90#274, 274A, 369
ASTM E1592 24 ga. allowable load of 48.48 psf @ 2.5’
Air infiltration ASTM E283 09 @ 1.57 psf
ASTM E1680 0.00 @ 20 psf
Water penetrationASTM E331no water @ 25 psf
ASTM E1646no water @ 12 psf

2 1/2” SSR

For a classic panel with narrow batten seams, this is available in a variety of gauges and has taper options

Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant Unlimited Thermal Movement
Customizations Available:
Tapering Options
Maximum Panel Length: 51′
Minimum Panel Length: 6′
Wind upliftUL90#190, 190B
Air infiltrationASTM E283No air penetraion @ 20 psf
ASTM E16800.019 cfm/ft2 @ 20 psf
Water penetrationASTM E331 No Water @ 25 psf
ASTM E1546 No water @ 20 psf

Snap on Seam

This two-component design is ideal for roof applications requiring curved panels. It is durable and allows for creativity in design

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
Panel Features:
Unlimited Thermal Movement
Customizations Available:
Factory Curving Options Field Curving Options High Seam Option Tapering Options
Solid Substrate Installation Only
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Snap on Seam – High Profile

The snap on seam design allows for easy installation or removal of panels. This is especially helpful in times of repairs

Panel Options Available: Solid Substrate Installation Only
Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant Unlimited Thermal Movement
Customizations Available:
Tapering Options
Solid Substrate Installation Only
Maximum Panel Length: 47′
Minimum Panel Length: 6′

Snap on Batten

This snap-on seam panel is wider than a standard panel and is beneficial for a bolder design effect

Substrate Offering:
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant Unlimited Thermal Movement
Customizations Available:
Tapering Options
Solid Substrate Installation Only
Maximum Panel Length: 47′
Minimum Panel Length: 6′

IP Snap 3

Trapezoidal panel design is mechanically snapped and works well for low-slope industrial applications and high performance, pre-engineered metal buildings

Substrate Offering:
22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant Snap-Fit Panel
Maximum Panel Length: 47′
Minimum Panel Length: 6′
Wind upliftUL90#93, 210A
ASTM E1592Results vary depending on Gauge and Thickness
Air infiltrationASTM E283 .006 @ 20 psf
ASTM E16800.00 @ 20 psf
Water penetrationASTM E331No water @ 20 psf
Water penetration ASTM E1646No water @ 20 psf
Minimum Roof Slope1/2: 12
Available Widths24”
Standard Lengths6’ to 47’

Hefti-Rib®

Superior strength-to-weight ratio and spanning capabilities set this panel apart. It adds texture and strength to designs and can act as a canvas on the exterior.

Panel Options Available: Panel Variations HR-288 and Reverse Run Hefti-Rib I are Available
Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel
Panel Features:
Vertical & Horizontal Applications
Customizations Available:
Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′
Minimum Panel Length: 6′

Silhouette HCF Series™

With a range of profiles and configurations, this horizontal concealed fastener system meets design requirements for a variety of applications

Panel Options Available: Multiple Panel Profiles Designs with both 12″ and 16″ options
Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel
Panel Features:
Factory Applied Sealant
Customizations Available:
Mitered Corners
Maximum Panel Length: 20′
Minimum Panel Length: 2′

V-Beam

The strength and spanning capabilities make this panel an excellent choice for dramatic roof and wall applications

Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel
Panel Features:
Vertical & Horizontal Applications
Customizations Available:
Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′
Minimum Panel Length: 6′

1/2″ Corrugated

This is an economical and versatile wall and roof panel with curving capabilities

Substrate Offering:
.032″ Aluminum .040″ Aluminum .050″ Aluminum 18 Gauge Steel 20 Gauge Steel 22 Gauge Steel 24 Gauge Steel 26 Gauge Steel
Panel Features:
Vertical & Horizontal Applications
Customizations Available:
Curving Options Mitered Corners Wall & Roof Variations
Maximum Panel Length: 45′
Minimum Panel Length: 6′

Architectural/Commercial Markets

From energy-saving cladding for schools to vibrant enclosure systems for large retail chains, Fabral is a reliable solution for whatever market you’re in.

Education

Government

Healthcare

Industrial

Retail

Modern-day models for education facilities have been designed with Fabral products. As the leading provider of metal for building envelope solutions, Fabral systems have been specified for projects in every commercial building segment. Durable exterior cladding is fitting for schools to tightly seal the building — netting next-level energy efficiency.

VISION House at Mariposa Meadows

Telluride, Colorado

One of the home’s most prominent features is its metal roofing system. The material, donated by Fabral, is our classic 24-gauge 1 ½" SSR metal roofing panels in Charcoal. This roof makes it easy to achieve structural stability and is designed to perform at optimum levels year after year.

Continue Reading

Submittal Builder

Use this Spec Builder to create custom packages or download a complete Submittal Package for the Fabral Stand N Seam, PowerSeam, Thin Seam, Hefti-Rib, or HCF panels.

Pre-Packaged Download

Click below for pre-packackged zipped downloads.

Create Your Own Package

To download files for additional Fabral panels and build your own specification package, name your file and then begin selecting.