Décor Flush II panels are recommended for siding, fascias, or soffits only. When used for wall applications, Décor Flush II should only be installed vertically. Install panels plumb, level and straight so it is watertight and without waves or other distortions, allowing for thermal movement considerations. Apply sealant tape or caulking as necessary at flashing and panel joints to prevent water penetration.
.032″ Aluminum .040″ Aluminum 22 Gauge Steel 24 Gauge Steel
For Soffit, Fascia and Vertical Wall Applications Only
Maximum Panel Length: 25′
Minimum Panel Length: 6′